User's Manual

Wireless Router Setup Manual
4 Getting to Know Your Wireless Router
v1.0, August 2008
Back Panel
Figure 4 describes the port connections on the back panel of the wireless router.
Router Label
The label on the back of the wireless router shows the router’s MAC address, serial number,
security PIN, and factory default login information.
The ports on the router are color-coded to distinguish your Internet port from the other four ports
that connect to the wired computer(s) on your LAN.
Figure 4
Figure 5
1. Antenna light on/off push button. The lights on top of the router
identify the activity of the eight internal antennas, flashing to show
which combination of antennas is receiving the strongest signals.
These antenna lights are off by default but can be turned on.
2. Factory default reset button. Press the reset button with a sharp
object for approximately 20 seconds to reset the router to the
factory default settings.
3. Four Local Area Network (LAN) 10/100/1000 Mbps Ethernet ports
for connecting the router to your local computers.
4. Internet/Wide Area Network (WAN) Ethernet port for connecting
the router to a cable or DSL modem.
5. AC power adapter outlet for connecting the power adapter.
RangeMax™ Wireless-N Gigabit Router WNR3500