User's Manual

Wireless Router Setup Manual
12 Installing Your Wireless Router Manually (Advanced, Mac, and Linux Users)
To start your network in the correct sequence:
1.
First, plug in and turn on the cable or DSL modem. Wait 2 minutes.
2. Now, plug the power cord into your wireless router and into a power outlet. Wait 1 minute.
3. Last, turn on your computer. It might take several minutes for your router to establish a
connection with your computer and your Internet provider.
Verifying Your Connection
Verify that your router is connected correctly by checking the wireless router status lights (as
illustrated in Figure 9).
Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
For DSL customers, if software logs you in to the Internet, do not run that
software. You might need to go to the Internet Explorer Tools menu, select
Internet Options, and then click the Connections tab, where you can select
Never dial a connection.