User Manual
Table Of Contents
- NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications and Factory Default Settings
- Appendix B Related Documents
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
2-12
v1.0, December 2008
• Or by checking the Generating a random Security PIN.... radio box and clicking Next,
The wireless USB adapter will generate a security PIN. Make note of the PIN. Then, enter
the security PIN, when instructed, into the configuration utility of the router or access
point.
5. After the wireless settings have been transmitted from the router or access point to the wireless
USB adapter, a snapshot of your wireless settings will display. A profile of these settings will
be created and given the same name (SSID) as your wireless network name. Click Finish to
connect to your network.
6. The Wireless Assistant displays showing the status of your connection and your signal
strength. Click Close to exist the Wireless Assistant.
Figure 2-14
Figure 2-15