User Manual
Table Of Contents
- NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications and Factory Default Settings
- Appendix B Related Documents
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100v2 User Manual
1-10
v1.0, December 2008
Connecting to a Non-WPS-Enabled Network
If no WPS-enabled network is enabled:
1. A screen similar to this appears showing the available wireless networks.
2. Select a wireless network, then click Next to proceed. If you select a secured network, the
Smart Wizard will detect it and you will be prompted to enter your passphrase. Click Next to
proceed.
3. A screen displays asking you whether you want to save a “profile” of your settings. Select
Yes, enter a profile name such as “home” or “work”, and click Next to proceed.
Figure 1-10
Note: Hidden networks do not broadcast the network name (SSID). These networks
are in the drop-down list, but the Network Name (SSID) field is blank.
Figure 1-11
Hidden network