User's Manual

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
5-2 Customizing Your Network Settings
v1.0, December 2008
To configure LAN IP settings, log in to the modem router, and under the Advanced heading, select
LAN Setup. The following screen displays:
If you make changes you must click Apply in order for the changes to take effect.
The LAN Setup fields are explained in the following table.
Figure 5-1
Note: If you change the LAN IP address of the modem router while connected through
the browser, you will be disconnected. You must then open a new connection to the
new IP address and log in again.
Table 5-1. LAN Setup
Settings Description
Device Name A descriptive name for the modem router, which will be
shown in the Network on Windows Vista and the Network
Explorer on all Windows systems. The Device Name field
cannot be blank.