User Manual

Custom Setup and Supervisor Functions 85
• Scan for hard drive media. Check for an internal hard drive
device installed in the Digital Entertainer Elite.
• Hard Drive Tools. Formats the drive or verify the health of the
drive. See “Hard Drive Tools” on page 85.
• Network test. Measure the data transfer between devices on your
network and your Digital Entertainer Elite.
• Update. Check for firmware updates for the Digital Entertainer
Elite on the NETGEAR website, or update the firmware from a file
on a USB storage device. See “Updating the Firmware” on
page 100 for more information.
• System Information. See “System Information” on page 94.
• Restart. Restart the Digital Entertainer Elite.
Hard Drive Tools
If an internal disk drive is installed, use the Hard Drive Tools screen to
format the drive or verify the health of the drive. You can also manually
copy individual files to the drive.
To access these options, press Home, and select More > Supervisor
functions > Hard Drive Tools.
Be sure that power to your Digital Entertainer Elite unit
is not interrupted during the firmware update process.
Failure to observe this precaution can permanently
damage the unit.
Following a firmware update, you need to reload your
media library into the Digital Entertainer Elite from the
backup location.