User Manual

NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
Index-7
v1.0, June 2008
default 2-3, 2-12, 2-16
users
maximum 1-1
W
wall mount kit 1-3, 1-7
install 2-13
warranty 1-3
WEP 3-1
configure 3-6
wireless
connection, lose 3-16
connectivity, test 2-12, 2-14
wireless access by MAC address
restricting 3-16
wireless bridge
different configurations 5-1
multi-point 5-1
multi-point, configure 5-1
repeater without client association 5-1
security profile 5-1
standard access point mode 5-1
wireless bridging
enable 5-2
wireless client
roaming 1-1
security separation 3-5 to 3-16
wireless coverage area. See range
wireless mode 2-8
default 2-8
wireless network name 2-8
default 3-2
wireless security options 3-1
wireless settings
advanced 4-11
aggregation length 4-11
AMPDU 4-12
basic 2-7
beacon interval 4-11
broadcast wireless network name 2-9
channel wdth 2-10
DTIM interval 4-12
fragmentation length 4-11
guard interval 2-10
MCS index/data rate 2-9
output power 2-10
preamble type 4-12
RIFS 4-12
RTS threshold 4-11
turn radio on 2-8
wireless mode 2-8
wireless network name (SSID) 2-8
wireless stations
available 3-17
trusted 3-17
Wireless-N Access Point
deploy 2-12
See also WN802Tv2
WMM
see QoS
WMM power save
configure 2-11
WN802Tv2
ethernet setup 2-2
password, default 4-1
WPA
client software support 3-3
dynamic per frame rekeying 3-2
preshared key passphrase 3-4
WPA with RADIUS 3-3
configuration of 3-9
configure 3-9
restrictions 3-9
WPA+WPA2 with RADIUS 3-3
configure 3-11
WPA/WPA2
support 1-2
use restrictions 3-3, 3-11
WPA/WPA-PSK
strong data security 3-2
WPA2
restrictions 3-10
WPA2 with RADIUS 3-3
configure 3-10
WPA2-PSK 3-3
configure 3-14
WPA-PSK 3-3