User Manual
Table Of Contents
- NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual (802.11bgn)
- About This Manual
- Conventions, Formats and Scope
- How to Use This Manual
- How to Print this Manual
- Revision History
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Chapter 3 Wireless Security Settings
- Chapter 4 Management
- Changing the Administrator Password
- Upgrading the Wireless Access Point Firmware
- Configuration File Management
- Rebooting the NETGEAR Wireless-N Access Point
- Viewing the Available Wireless Stations List
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Configuring the Advanced Wireless Settings
- Configuring the RADIUS Server Settings
- RADIUS Server Settings Fields
- Chapter 5 Advanced Wireless Bridging
- Chapter 6 Troubleshooting
- No lights are lit on the access point.
- The Ethernet light is not lit.
- The WLAN light is not lit.
- I cannot configure the access point from a browser.
- I cannot access the Internet or the LAN with a wireless capable computer.
- When I enter a URL or IP address I get a timeout error.
- Restore Factory Default Settings
- More Help
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
Step 1
Step 2
Step 3
Figure 2-7 Installing the wall mount kit
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
2-14 Installation and Configuration
v1.0, June 2008
Configuring and Testing Your PCs for Wireless Connectivity
Program the wireless adapter of your PCs to have the same SSID and channel that you configured
for the WN802Tv2 (see
“Configuring Basic Wireless Settings”). Check that they have a wireless
link and are able to obtain an IP address by DHCP from the WN802Tv2, when DHCP is enabled.
Note: If you are configuring the WN802Tv2 from a wireless computer and you change
the SSID, channel, or security profile settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings of
your computer to match the new settings.
Once your PCs have basic wireless connectivity to the WN802Tv2, you can deploy the
WN802Tv2 and configure the advanced wireless security functions (see
Chapter 3, “Wireless
Security Settings”).