User Manual
Table Of Contents
- NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual (802.11bgn)
- About This Manual
- Conventions, Formats and Scope
- How to Use This Manual
- How to Print this Manual
- Revision History
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Chapter 3 Wireless Security Settings
- Chapter 4 Management
- Changing the Administrator Password
- Upgrading the Wireless Access Point Firmware
- Configuration File Management
- Rebooting the NETGEAR Wireless-N Access Point
- Viewing the Available Wireless Stations List
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Configuring the Advanced Wireless Settings
- Configuring the RADIUS Server Settings
- RADIUS Server Settings Fields
- Chapter 5 Advanced Wireless Bridging
- Chapter 6 Troubleshooting
- No lights are lit on the access point.
- The Ethernet light is not lit.
- The WLAN light is not lit.
- I cannot configure the access point from a browser.
- I cannot access the Internet or the LAN with a wireless capable computer.
- When I enter a URL or IP address I get a timeout error.
- Restore Factory Default Settings
- More Help
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
2-4 Installation and Configuration
v1.0, June 2008
• When connected to the Internet, you can also click Knowledge Base to access
NETGEAR’s knowledge base online.
• Click Logout to exit the WN802Tv2. (You will automatically be logged out of the
wireless access point after 5 minutes of no activity.)
To set the Access Point Name and Country/Region:
1. On logging in, the General settings screen under Configuration > System > Basic displays..
Figure 2-2 Access Point name and Country/Region
2. Enter the Access Point Name of the WN802Tv2.
The access point name is printed on the back label of the WN802Tv2. The default is
netgearxxxxxx, where xxxxxx represents the last 6 digits of the WN802Tv2 MAC address.
You may modify the default name with a unique name up to 15 characters long.
3. Select the country/region where the WN802Tv2 can be used.
Note: If your country or region is not listed, please check with your local government
agency.
4. Click Apply to save your settings.