User Manual
Table Of Contents
- NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual (802.11bgn)
- About This Manual
- Conventions, Formats and Scope
- How to Use This Manual
- How to Print this Manual
- Revision History
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Chapter 3 Wireless Security Settings
- Chapter 4 Management
- Changing the Administrator Password
- Upgrading the Wireless Access Point Firmware
- Configuration File Management
- Rebooting the NETGEAR Wireless-N Access Point
- Viewing the Available Wireless Stations List
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Configuring the Advanced Wireless Settings
- Configuring the RADIUS Server Settings
- RADIUS Server Settings Fields
- Chapter 5 Advanced Wireless Bridging
- Chapter 6 Troubleshooting
- No lights are lit on the access point.
- The Ethernet light is not lit.
- The WLAN light is not lit.
- I cannot configure the access point from a browser.
- I cannot access the Internet or the LAN with a wireless capable computer.
- When I enter a URL or IP address I get a timeout error.
- Restore Factory Default Settings
- More Help
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
Installation and Configuration 2-3
v1.0, June 2008
2. Turn on your computer and configure it with a static IP address of 192.168.0.210 and
255.255.255.0 for the Subnet Mask.
3. Connect an Ethernet cable from the WN802Tv2 to the computer.
4. Connect the power adapter to the WN802Tv2 and verify the following:
• The PWR power light goes on.
• The Ethernet port of the wireless access point is lit when connected to a powered on
computer.
• The WLAN LED should be blinking.
Configuring Your Basic WLAN Settings
The following section describes how to log in to the wireless access point and configure the basic
WLAN settings.
To log in and configure the WN802Tv2 for LAN access:
1. Connect to the WN802Tv2 by opening a browser window on your PC and entering http://
192.168.0.233 in the address field. The WN802Tv2 Login screen displays (see
Figure 2-1).
2. Enter admin for the user name and password for password, both in lower case letters.
Figure 2-1 Login screen
3. Click Login. The main menu of the WN802Tv2 displays as shown in Figure 2-2.
• When the wireless access point is connected to the Internet, you can click the
Documentation link under the Support menu to view the documentation for the wireless
access point online (see
Figure 6-2).