User Manual
Table Of Contents
- NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual (802.11bgn)
- About This Manual
- Conventions, Formats and Scope
- How to Use This Manual
- How to Print this Manual
- Revision History
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Chapter 3 Wireless Security Settings
- Chapter 4 Management
- Changing the Administrator Password
- Upgrading the Wireless Access Point Firmware
- Configuration File Management
- Rebooting the NETGEAR Wireless-N Access Point
- Viewing the Available Wireless Stations List
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Configuring the Advanced Wireless Settings
- Configuring the RADIUS Server Settings
- RADIUS Server Settings Fields
- Chapter 5 Advanced Wireless Bridging
- Chapter 6 Troubleshooting
- No lights are lit on the access point.
- The Ethernet light is not lit.
- The WLAN light is not lit.
- I cannot configure the access point from a browser.
- I cannot access the Internet or the LAN with a wireless capable computer.
- When I enter a URL or IP address I get a timeout error.
- Restore Factory Default Settings
- More Help
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
1-6 Introduction
v1.0, June 2008
Back Panel of the NETGEAR Wireless-N Access Point
The back of the WN802Tv2 contains the following listed items, viewed
Figure 1-2 Back panel of the WN80Tv2
from top to bottom:
1. The Reset button, which is used to reset the WN802Tv2 or restore the factory default settings.
See
Appendix A, “Default Settings and Technical Specifications” for more information on
restoring the factory default settings.
2. The Ethernet port, used to establish a 10 Mbps, 100 Mbps or 1000 Mbps connection with the
network.
3. AC Universal Power Supply outlet.
NETGEAR Wireless-N Access Point Default Settings
Location
The label on the rear panel of the wireless access point contains the serial number, MAC address,
and default login information for your WN802Tv2 device.
Reset button
Ethernet port
Power