User Manual
Table Of Contents
- NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual (802.11bgn)
- About This Manual
- Conventions, Formats and Scope
- How to Use This Manual
- How to Print this Manual
- Revision History
- Chapter 1 Introduction
- Chapter 2 Installation and Configuration
- Chapter 3 Wireless Security Settings
- Chapter 4 Management
- Changing the Administrator Password
- Upgrading the Wireless Access Point Firmware
- Configuration File Management
- Rebooting the NETGEAR Wireless-N Access Point
- Viewing the Available Wireless Stations List
- Viewing General Summary Information
- Viewing Network Traffic Statistics
- Configuring the Advanced Wireless Settings
- Configuring the RADIUS Server Settings
- RADIUS Server Settings Fields
- Chapter 5 Advanced Wireless Bridging
- Chapter 6 Troubleshooting
- No lights are lit on the access point.
- The Ethernet light is not lit.
- The WLAN light is not lit.
- I cannot configure the access point from a browser.
- I cannot access the Internet or the LAN with a wireless capable computer.
- When I enter a URL or IP address I get a timeout error.
- Restore Factory Default Settings
- More Help
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
- Index
NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
Introduction 1-5
v1.0, June 2008
You can use the status lights on the front of the wireless access point to verify various conditions
described in the following table
Table 1-1. Port and system LEDs
Feature Detailed Description Comment
LAN Port LED
Off – No Link is detected
H/W control
WLAN LED
Off – No Link is detected
S/W control
Power/Diag S/W control
:
.
Link/Act
Green – Giga Ethernet link is properly
made
Amber – Fast Ethernet link is properly
made
Sparkle – Active
Wireless Link/Act
Blue – A 802.11n WLAN link is properly
made
Sparkle – Network activity is occurring
Green – Power is on
Amber – System is booting up
Sparkle Amber – Firmware is upgrading
Off – Power is off