User Manual Part 2

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Monitoring System Performance 11-15
v1.0, July 2008
Monitoring VPN Tunnel Connection Status
To review the status of current VPN tunnels:
1. Select VPN > Connection Status from the main/submenu, and then select the IPsec VPN
Connection Status tab. The IPsec Connection Status screen displays.
The Active IPsec SAs table lists each active connection with the following information.
2. Select the SSL VPN Connection Status tab and the SLL VPN Connection Status screen
displays.
Figure 11-11OK
Item Description
Policy Name The name of the VPN policy associated with this SA.
Endpoint The IP address on the remote VPN endpoint.
Tx (KB) The amount of data transmitted over this SA.
Tx (Packets) The number of IP packets transmitted over this SA.
State The current status of the SA. Phase 1 is Authentication phase and Phase 2 is
Key Exchange phase.
Action Use this button to terminate/build the SA (connection) if required.
Figure 11-12Need new screenshot