User Manual Part 2

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Monitoring System Performance 11-9
v1.0, July 2008
Monitoring the WAN Port Status
You can monitor the status of the WAN connection, the Dynamic DNS Server connection, and the
DHCP Server connection. To monitor the status of the WAN port:
1. Select Network Configuration from the main menu and WAN Settings in the submenu.
The WAN ISP Settings screen is displayed.
2. Click the WAN Status link in the upper right-hand section of the screen.
The Connection Status popup window displays a status report on the WAN port. See figure
12-4.
LAN Port Displays the current settings for MAC address, IP address, DHCP role and IP
Subnet Mask that you set in the LAN IP Setup page. DHCP can be either Server
or None.
WAN Configuration Indicates whether the WAN Mode is Single, Dual, or Rollover, and whether the
WAN State is UP or DOWN. It also is displayed if:
• NAT is Enabled or Disabled.
• Connection Type: DHCP enabled or disabled.
• Connection State
• WAN IP Address
• Subnet Mask
• Gateway Address
• Primary and Secondary DNS Server Addresses
• MAC Address.
Note: The Router Status screen displays current settings and statistics for your router.
As this information is read-only, any changes must be made on other pages.
Item Description