User Manual Part 2

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
9-16 Firewall and Network Management
v1.0, July 2008
2. From the Date/Time pull-down menu, choose the Local Time Zone.
This is required for scheduling work correctly. The VPN firewall includes a real-time clock
(RTC), which it uses for scheduling.
3. If supported in your region, click Automatically Adjust for Daylight Savings Time.
4. Select an NTP Server option:
• Use Default NTP Servers. The RTC is updated regularly by contacting a Netgear NTP
server on the Internet. A primary and secondary (backup) server are preloaded.
• Use Custom NTP Servers. If you prefer to use a particular NTP server, enter the name or
IP address of the NTP Server in the Server 1 Name/IP Address field. You can enter the
address of a backup NTP server in the Server 2 Name/IP Address field. If you select this
option and leave either the Server 1 or Server 2 fields empty, they will be set to the default
Netgear NTP servers.
5. Click Apply to save your settings.
Figure 9-6Need new screen shot
Note: If you select the default NTP servers or if you enter a custom server FQDN, the
firewall must determine the IP address of the NTP server by a DNS lookup.
You must configure a DNS server address in the Network menu before the
firewall can perform this lookup.