User Manual Part 2

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
7-8 Virtual Private Networking Using SSL
v1.0, July 2008
Adding Servers
To configure Port Forwarding, you must define the internal host machines (servers) and TCP
applications available to remote users. To add servers, follow these steps:
1. Select VPN > SSL VPN from the main/submenu, and then select the Port Forwarding tab. The
Port Forwarding screen display.
2. In the Add New Application for Port Forwarding section, enter the IP address of an internal
server or host computer.
3. In the TCP Port field, enter the TCP port number of the application to be tunneled. The table
below lists many commonly used TCP applications and port numbers.
Figure 7-4OK
Table 7-1. Port Forwarding Applications/TCP Port Numbers
TCP Application Port Number
FTP Data (usually not needed) 20
FTP Control Protocol 21
SSH 22
a
Telnet 23
a
SMTP (send mail) 25
HTTP (web) 80