User Manual Part 2

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Virtual Private Networking Using SSL 7-17
v1.0, July 2008
1. Select VPN > SSL VPN from the main/submenu, and select the Policies tab. The Policies
screen displays.
2. Make your selection from the following Query options:
• Click Global if this new policy is to exclude all users and groups.
• Click Group if this new policy is to be limited to a selected group.
Open the pull-down menu and choose the relevant group’s name.
• Click User if this new policy is to be limited to a selected user.
Open the pull-down menu and choose the individual user’s name.
3. Click Add. The Add Policies screen appears.
4. In the Add SSL VPN Policies section, review the Apply Policy To options and click one.
Depending upon your selection, specific options to the right are activated or inactivated as
noted in the following:
• If you choose Network Resource, you’ll need to enter a descriptive Policy Name, then
choose a Defined Resource and relevant Permission (PERMIT or DENY) from the pull-
down menus.
Figure 7-9OK
Note: You should have already created the needed groups or users as described in
“Adding Authentication Domains, Groups, and Users” on page 8-1.