User Manual Part 1

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Wireless Configuration 4-23
v1.0, July 2008
5. Click Apply to save your settings.
Configuring WPA and WPA2 with RADIUS
Not all wireless adapters support WPA and WPA2. Client software is required on the client:
• Windows XP and Windows 2000 with Service Pack 3, or above, do include the client software
that supports WPA. The wireless adapter hardware and driver must also support WPA.
• Service Pack 3 does not include the client software that supports WPA2. Make sure your client
card supports WPA2. The wireless adapter hardware and driver must also support WPA2.
Consult the product documentation for your wireless adapter; WPA client software for instructions
on configuring WPA settings; and WPA2 client software for instructions on configuring WPA2
settings.
To configure WPA and WPA2 with RADIUS in the Wireless Settings menu:
1. Click the WPA and WPA2 radio button on the left to enable WPA and WPA2 data encryption.
When you select the WPA and WPA2 data encryption, only the feature selections for WPA and
WPA2 with RADIUS are made active on screen, while the other options and features remain
grayed out.
2. Select RADIUS from the WPA with drop-down menu on the right.
PSK is the default WPA and the RADIUS Server Settings are highlighted.
3. Click on the TKIP+AES radio button for Encryption on the right.
TKIP+AES is the default WPA encryption.
4. Enter the RADIUS Server Settings:
Figure 4-13