User Manual Part 1

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
6-6 Virtual Private Networking Using IPsec
v1.0, July 2008
.
2. Select VPN Client as your VPN tunnel connection.
The wizard needs to know whether you are planning to connect to a remote gateway or setting
up the connection for a remote client PC to establish a secure connection to this device.
3. Create a Connection Name.
Enter an appropriate name for the connection. This name is not supplied to the remote VPN
client. It is used to help you manage the VPN settings.
4. Enter a Pre-shared Key.
The key must be entered both here and on the remote VPN gateway, or the remote VPN Client.
This key length should be minimum 8 characters and should not exceed 49 characters. This
method does not require using a CA (Certificate Authority).
5. {{Select the WAN interface to act as this endpoint of the VPN tunnel.}}
6. Enter the public Remote WAN IP address of the gateway to which you want to connect.
Figure 6-4New screenshot