User Manual
Table Of Contents
- Wireless-N ADSL2+ Modem Router DGN2000 Setup Manual
- Contents
- Getting to Know Your Wireless Router
- Installing Your Router Using the Smart Wizard
- Installing Your Router Manually (Advanced, Mac, and Linux Users)
- Configuring Your Wireless Network
- Troubleshooting
- Technical Specifications
- Related Documents
- Registration and Certifications
Installing Your Router Manually (Advanced, Mac, and Linux Users) 17
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your wireless-N modem
router to set it up initially and to make any changes to your wireless router’s settings later.
To access the router:
1.
Type http://192.168.0.1 in the address field of your browser, and then click Enter.
.
A login window similar to the one shown in Figure 11 will display.
The factory default state is reset when you use the Restore Factory Settings button.
See “Restoring the Default Configuration and Password” on page 36 for more
information.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
Figure 10
Figure 11