User Manual
Table Of Contents
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Default Configuration Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual
2-19
v1.0, June 2008
a. In the Profile field, select the profile, or type in a profile name.
b. In the Network Name (SSID) field, select the network, or enter the SSID.
c. In the Security section of the screen, select WPA-PSK [TKIP].
For more information about wireless security, see the link to the online document
“Wireless Networking Basics” in Appendix B.
3. Save your settings in a profile.
a. Click Save Profile. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Advanced Settings
The default Advanced settings usually work fine. To view them, click the Advanced Settings
button on the Settings tab. Changing these settings is recommended only for advanced users who
have a specific reason to adjust them. Use the Help button to understand these options.
Note: You will not get a wireless network connection unless the SSID that you
enter exactly matches the SSID used by the access point.
Figure 2-18