User Manual
Table Of Contents
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Default Configuration Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual
2-8
v1.0, June 2008
4. When prompted, enter the router PIN, and then click Next.
The Smart Wizard initiates your wireless connection. Within 4 minutes it displays a message
telling you whether or not it successfully connected to the WPS router or access point.
5. You can use the Status Bar to verify your network connection. For more information, see
“Smart Wizard Status Bar” on page 1-8. Click Close to exit the Smart Wizard.
Generating a PIN to Connect to a Wireless Access Point or Router
The wireless adapter can generate a PIN to connect to the router. This is useful if you do not know
what the router PIN is. If you know the router PIN and want to enter it, see“Using the Router PIN
to Connect to a Wireless Access Point or Router” on page 2-7.
To generate a PIN and connect to a WPS wireless router or access point:
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network (or click
the Networks tab and select the network).
The wireless adapter detects a network with WPS.
2. Select Yes to use WPS, and then click Next.
3. Select No (to use a PIN), and then click Next.
Figure 2-8