User Manual
Table Of Contents
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Default Configuration Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual
2-7
v1.0, June 2008
Using the Router PIN to Connect to a Wireless Access Point or Router
If you know the router PIN, then you can enter it to to connect to the router with WPS. If you do
not know the router PIN, then the wireless adapter can generate a PIN to connect to the router. See
“Generating a PIN to Connect to a Wireless Access Point or Router” on page 2-8.
To connect to a WPS router or access point using its PIN:
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network. (or click
the Networks tab and select a network).
The wireless adapter detects the network with WPS.
2. Select Yes to use WPS, and then click Next.
3. Select No (to use a PIN), and then click Next.
Figure 2-6
Figure 2-7