User Manual
Table Of Contents
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Default Configuration Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual
2-6
v1.0, June 2008
Using a WPS Button to Connect to a Wireless Access Point or Router
To join a network using a PBC:
1. Use the icon to open the Smart Wizard. On the status bar, click Join a Network. The
adapter detects a network with WPS:
2. Select Yes to use WPS, and then click Next.
3. Select Yes (to use a push button), and then click Next.
4. On the access point or router that you have selected, open its Smart Wizard or configuration
utility.
5. Select Add WPS Client. On the Add WPS Client screen, select Push Button.
6. To start the WPS process, either press the push button on the access point or router, or click the
icon on the Add WPS Client screen.
7. Within 2 minutes, return to the Smart Wizard screen for the WN711, and click the icon.
The Smart Wizard initiates your wireless connection.
8. You can use the status bar to verify your network connection. For more information, see
“Smart Wizard Status Bar” on page 1-8. Click Close to exit the Smart Wizard.
9. Close the Smart Wizard or configuration utility for the access point or router.
Figure 2-5