User Manual
Table Of Contents
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Default Configuration Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N ExpressCard WN711 User Manual
1-6
v1.0, June 2008
5. Depending on whether or not a wireless access point or router in the network supports a Wi-Fi
Protected Setup (WPS), there are two possibilities:
• If a wireless access point or router in the network supports WPS, a WPS screen displays.
Select Yes to connect to the access point or router through WPS, and then click Next.
Follow the wizard.
• If none of the wireless access points or routers in the network support WPS, the following
screen displays. Select the wireless network from the list, and then click Next. The wizard
records your choice. If the network uses security, then the Smart Wizard detects it. Follow
the wizard steps for security (if used) and for saving a profile.
Note: See “Using WPS to Connect to a Wireless Network” on page 2-5for a
detailed explanation of how to connect to an access point or router through
WPS.
Figure 1-5
Note: Hidden networks do not broadcast the network name (SSID). These
networks are in the list, but the Network Name (SSID) field is blank.
Hidden