User's Manual
Table Of Contents
- NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Disabling the Windows Zero Configuration Utility
- Understanding the Smart Wizard
- Viewing Wireless Networks in Your Area
- Finding a Network
- Profiles
- Setting Up a Profile to Connect to an Access Point or Router
- Setting up a Computer-to-Computer (Ad Hoc) Profile
- Wireless Security
- Using Wireless Security Features
- Wireless Network Name (SSID) and Security Settings
- Setting Up WPA-PSK Security
- Setting Up WEP Encryption Security
- Statistics Tab
- About Tab
- Advanced Settings
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications and Factory Default Settings
- Appendix B Related Documents
NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual
1-7
v1.0, December 2007
You are prompted to let the wizard help you connect to a network (recommended).
2. Click Next to continue.
The Smart Wizard finds the wireless networks in your area, and displays the following screen:
3. Select the wireless network from the drop-down list. The wizard records your choice.
If the network uses security, then the Smart Wizard detects it.
4. Follow the wizard steps for security (if used) and for saving a profile.
Figure 1-4
Figure 1-5
Note: Hidden networks do not broadcast the network name (SSID). These networks
are in the drop-down list, but the Network Name (SSID) field is blank.
Hidden network