User's Manual
Table Of Contents
- NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111 User Manual
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Disabling the Windows Zero Configuration Utility
- Understanding the Smart Wizard
- Viewing Wireless Networks in Your Area
- Joining a Network
- Profiles
- Setting up a Profile to Connect to an Access Point or Router
- Setting up a Computer-to-Computer (Ad Hoc) Profile
- Wireless Security
- Using Wireless Security Features
- Wireless Network Name (SSID) and Security Settings
- Setting up WEP Encryption Security
- Setting up WPA-PSK Security
- Statistics Tab
- About Tab
- Advanced Settings
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications and Factory Default Settings
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111 User Manual
1-10
v1.0, July 2007
2. Insert the RangeMax WN111 Wireless-N USB 2.0 Adapter in the plastic cradle.
3. Place one of the other pieces of loop and hook fastener on the back of your monitor near the
top for better reception.
Removing the WN111 Software
You can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the RangeMax WN111 Wireless-N USB 2.0 Adapter
program group, select the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the RangeMax WN111 Wireless-N USB 2.0 Adapter option, and follow the screen prompts.
Figure 1-10
Figure 1-11
Note: The last piece of the fastener can be placed on the side of your PC monitor
nearest your wireless access point, if you are using the USB Adapter with a
desktop PC.