User's Manual
Table Of Contents
- NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111 User Manual
- Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Disabling the Windows Zero Configuration Utility
- Understanding the Smart Wizard
- Viewing Wireless Networks in Your Area
- Joining a Network
- Profiles
- Setting up a Profile to Connect to an Access Point or Router
- Setting up a Computer-to-Computer (Ad Hoc) Profile
- Wireless Security
- Using Wireless Security Features
- Wireless Network Name (SSID) and Security Settings
- Setting up WEP Encryption Security
- Setting up WPA-PSK Security
- Statistics Tab
- About Tab
- Advanced Settings
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Technical Specifications and Factory Default Settings
- Appendix B Related Documents
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111 User Manual
1-9
v1.0, July 2007
If you right-click the system tray icon, you can disable the Internet notification feature by clearing
the check mark enabling notification, as shown in
the following figure. If you do so, then only the
IP address is shown.
In Vista, there is one more option: Enable NETGEAR Smart Wizard.
If you clear the check mark for Enable NETGEAR Smart Wizard, the NETGEAR Smart Wizard
will be disabled and you will need to setup the wireless adapter with Vista Auto configuration.
WN111 LED
The LED on the WN111 indicates the condition of wireless link
Placing the USB Adapter Cradle
You can attach the RangeMax WN111 Wireless-N USB 2.0 Adapter directly to a USB port on your
computer, or use the USB cable to extend the range and obtain better wireless reception.
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener provided
in the package for better USB Adapter placement on a notebook computer:
1. The RangeMax WN111 Wireless-N USB 2.0 Adapter comes with three black fasteners.
Locate the one with a prickly side and attach it to the plastic cradle on the middle of the
outside rear.
Figure 1-8
Figure 1-9
LED Meaning
Off • The WN111 in not plugged in to the PC.
• Power save mode (default from power up
or reset).
Blink Looking for network association.
On Associated or joined with network.