User's Manual
Table Of Contents
- About This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Disabling the Windows XP Zero Configuration Utility
- Understanding the Smart Wizard
- Viewing Wireless Networks in Your Area
- Finding a Network
- Profiles
- Setting up a Profile to Connect to an Access Point or Router
- Setting up a Computer-to-Computer (Ad Hoc) Profile
- Wireless Security
- Using Wireless Security Features
- Wireless Network Name (SSID) and Security Settings
- Setting up WEP Encryption Security
- Setting up WPA2-PSK Security
- Setting up WPA-PSK Security
- Advanced Settings
- Statistics Page
- About Page
- Chapter 3 Wireless Network Performance
- Chapter 4 Troubleshooting
- Appendix A Default Configuration Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax Next Wireless-N Express Card WN711 User Manual
1-6
v1.0, April 2007
b. Select the wireless network from the drop-down list, and the wizard records your choice.
Hidden networks do not broadcast the Network Name (SSID). These networks are in the
drop-down list, but the Network Name (SSID) is blank. If the network uses security, the
Smart Wizard detects it.
c. Follow the Wizard steps for Security (if used) and for saving a Profile.
d. After you have reviewed the settings, click Finish.
The WN711 icon appears in the system tray and on the desktop. The wizard initiates
your wireless connection. It could take up to a minute to establish your wireless
connection. The Smart Wizard Settings page opens.
5. Use the status bar to verify your wireless connectivity. See “Connecting to Wireless Networks
and the Internet” on page 1-7.
Figure 1-5
Figure 1-6
Hidden