User Manual
Table Of Contents
- 54Mbps Wireless Router Model KWGR614 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration of the Router
- Configuring Port Triggering
- Configuring for Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Prioritizing Internet Traffic Using Application-Based QoS
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
54Mbps Wireless Router Model KWGR614 Reference Manual
Advanced Configuration of the Router 5-3
v1.2, September 2006
1. Click Add Service.
2. Enter a service name in the Service Name box.
3. In the Service User box, selecting the default value of Any allows the service to be used by
everyone in your network. Otherwise, to restrict the service to a particular PC, select Single
address and enter the PC’s IP address.
4. In the Service Type box, select between TCP (the default) and UDP.
5. In the Triggering Port box, enter the outbound port number that the application will use.
6. Set the parameters for the inbound connection—the connection type (TCP or UDP), the
starting port, and ending port numbers.
7. Click Apply to save your changes.
Figure 5-2
Note: For the information required for steps 4-6 above, refer to the game or
applications manual or support website.