User Manual
Table Of Contents
- 54Mbps Wireless Router Model KWGR614 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration of the Router
- Configuring Port Triggering
- Configuring for Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Prioritizing Internet Traffic Using Application-Based QoS
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
54Mbps Wireless Router Model KWGR614 Reference Manual
5-2 Advanced Configuration of the Router
v1.2, September 2006
• Port Triggering Timeout
Enter a value up to 9999 minutes. The Port Triggering Timeout value controls the inactivity
timer for the designated inbound port(s). The inbound port(s) will be closed when the
inactivity timer expires.
• For Internet Games or Applications
Before starting, you'll need to know which service, application or game you'll be configuring.
Also, you'll need to have the outbound port (triggering port) address for this game or
application.
Follow these steps to set up a computer to play Internet games or use Internet applications:
Figure 5-1
Note: If the Disable Port Triggering box is checked after configuring port triggering,
port triggering will be disabled but any port triggering configuration information
you added to the router will be retained even though it will not be used.










