User Manual
Table Of Contents
- 54Mbps Wireless Router Model KWGR614 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration of the Router
- Configuring Port Triggering
- Configuring for Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Prioritizing Internet Traffic Using Application-Based QoS
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
54Mbps Wireless Router Model KWGR614 Reference Manual
Maintenance 4-7
v1.2, September 2006
Click on the Connection Status button to display the connection status, as shown below.
This screen shows the following statistics:.
Wireless AP Indicates if the Access Point feature of the Router is enabled. If not
enabled, the Wireless LED on the front panel will be off.
Broadcast Name Indicates if the router is broadcasting its SSID.
Figure 4-4
Table 4-2: Connection Status Items
Item Description
IP Address The WAN (Internet) IP Address assigned to the router.
Subnet Mask The WAN (Internet) Subnet Mask assigned to the router.
Default Gateway The WAN (Internet) default gateway the router communicates with.
DHCP Server The IP address of the DHCP server which provided the IP configuration addresses.
Table 4-1. Wireless Router Status Fields
Field Description