User Manual
Table Of Contents
- 54Mbps Wireless Router Model KWGR614 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration of the Router
- Configuring Port Triggering
- Configuring for Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Prioritizing Internet Traffic Using Application-Based QoS
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
54Mbps Wireless Router Model KWGR614 Reference Manual
Content Filtering 3-3
v1.2, September 2006
To add a keyword or domain, type it in the Keyword box, click Add Keyword, then click Apply.
To delete a keyword or domain, select it from the list, click Delete Keyword, then click Apply.
Keyword application examples:
• If the keyword “XXX” is specified, the URL <http://www.badstuff.com/xxx.html> is blocked.
• If the keyword “.com” is specified, only Web sites with other domain suffixes (such as .edu or
.gov) can be viewed.
• If you wish to block all Internet browsing access during a scheduled period, enter the keyword
“.” and set the schedule in the Schedule menu.
To specify a Trusted User:
1. Enter that computer’s IP address in the Trusted User box.
2. Click Apply.
You may specify one Trusted User, which is a computer that will be exempt from blocking and
logging. Since the Trusted User will be identified by an IP address, you should configure that
computer with a fixed IP address.
Blocking Access to Internet Services
The 54Mpbs Wireless Router allows you to block the use of certain Internet services by computers
on your network. This is called service blocking or port filtering. The Block Services menu is
shown below:
Figure 3-2










