User Manual
Table Of Contents
- 54Mbps Wireless Router Model KWGR614 Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration of the Router
- Configuring Port Triggering
- Configuring for Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Prioritizing Internet Traffic Using Application-Based QoS
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
54Mbps Wireless Router Model KWGR614 Reference Manual
Wireless Configuration 2-3
v1.2, September 2006
• WPA-PSK and WPA2-PSK. Provides strong data security. WPA-PSK and WPA2-PSK will
block eavesdropping. Because these are new standards, wireless device driver and software
availability may be limited.
• Turn off the wireless LAN. If you disable the wireless LAN, wireless devices cannot
communicate with the router at all. You might choose to turn off the wireless LAN when you
are away and others on the network all use wired connections.
Understanding Wireless Settings
To configure the Wireless settings of your wireless router, type http://www.routerlogin.net into
your internet browser. Enter the default user name of admin and default password of password, or
whatever LAN address and password you have set up. Click the Wireless link in the main menu of
the browser interface. The Wireless Settings menu appears, as shown below.
Figure 2-2