User's Manual
Table Of Contents
- DG834N RangeMaxTM NEXT Wireless ADSL2+ Modem Router Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
DG834N RangeMax
TM
NEXT Wireless ADSL2+ Modem Router Reference Manual
A-2 Technical Specifications
v1.0, May 2005
Default Configuration
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for
three seconds. Your device will return to the factory configuration settings shown in the table
below.
Interface Specifications
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A or B
Feature Default Behavior
Router Login
User Login URL http://www.routerlogin.net or http://www.routerlongin.com
User Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Use Default address
WAN MTU Size 1500
Port Speed AutoSense
Local Network (LAN)
Lan IP 192.168.0.1
Subnet Mask 255.255.255.0
RIP Direction None
RIP Version Disabled
RIP Authentication None
DHCP Server Enabled
DHCP Starting IP Address 192.168.0.2
DHCP Ending IP Address 192.168.0.254
DMZ Enabled or disabled