User Manual

Digital Entertainer Model EVA700 User Manual
Installing Your Digital Entertainer 1-5
v1.0, April 2006
2. Use the NETGEAR CD to install the software.
• For Windows XP computers, see “Installing Software with a Windows
XP Computer” on page 1-7.
• For Intel Viiv computers, see “Installing Software with a Viiv Computer”
on page 1-9.
3. Set up the digital entertainer.
• For Windows XP computers, see “Setting up the Media Player” on
page 1-8.
• For Intel Viiv computers, see
Connecting the Media Player
Before installation, make sure that your Ethernet network is up and running.
1. Go to the digital entertainer, and determine which type of cable your
television uses:
• Video cable and Audio cable: These two cables are included, and are
compatible with most televisions in the U.S.
• SCART: This cable is often used in Europe and Australia, and is not
included in the package. However, if you have a SCART cable the digital
entertainer recognizes it, and you can continue to use these instructions.
• S-Video, or Component Video: These cables are not included in the
package, and you will need to change the digital entertainer settings in
order to use them.