User's Manual

Reference Manual for the NETGEAR ProSafe VPN Client
D-10 NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01
– In the Protocol menu, All is selected
– The Connect using Secure Gateway Tunnel checkbox is checked
c. In this example, select IP Subnet as the ID Type, 192.168.0.0 in the Subnet field (the
Subnet address is the LAN IP Address of the FVL328 with 0 as the last number), and
255.255.255.0 in the Mask field, which is the LAN Subnet Mask of the FVL328
d. In the ID Type menus, select Domain Name and Gateway IP Address. Enter FVL328 in
the Domain Name field. In this example, 66.120.188.153 would be used for the Gateway
IP Address, which is the static IP address for the FVL328 WAN port.
3. Configure the Connection Identity Settings.
a. In the Network Security Policy list, click the My Identity subheading.
Figure D-9: My Identity
In this example, select Domain Name as the ID Type, and enter VPNclient. Also, accept
the default Internal Network IP Address of 0.0.0.0.
Figure D-10: My Identity Pre-Shared Key
b.
Click Pre-Shared Key.