User's Manual

Reference Manual for the NETGEAR ProSafe VPN Client
D-4 NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01
Figure D-3: NETGEAR FVL328 IKE Policy Configuration
– From the Encryption Algorithm drop-down box, select 3DES. This will also be selected in
the NETGEAR ProSafe VPN Client Security Policy Authentication Phase 1 Proposal 1
Encrypt Alg field, as seen in “Connection Security Policy Authentication (Phase 1)“ on
page D-12.
– From the Authentication Algorithm drop-down box, select SHA-1.This will also be
selected in the NETGEAR ProSafe VPN Client Security Policy Authentication Phase 1
Proposal 1 Hash Alg field, as seen in “Connection Security Policy Authentication (Phase
1)“ on page D-12.
– From the Authentication Method radio button, select Pre-shared Key. This will also be
selected in the NETGEAR ProSafe VPN Client Security Policy Authentication Phase 1
Proposal 1 Authentication Method field, as seen in “Connection Security Policy
Authentication (Phase 1)“ on page D-12.
– In the Pre-Shared Key field, type hr5xb84l6aa9r6. You must make sure the key is the
same for both the FVL328 and the NETGEAR VPN Client. This will also be selected in
the NETGEAR ProSafe VPN Client Security Policy Authentication Phase 1 Proposal 1
Encrypt Alg field, as seen in “Connection Identity Pre-Shared Key“ on page D-11.
– From the Diffie-Hellman (DH) Group drop-down box, select Group 2 (1024 Bit). This
will also be selected in the NETGEAR ProSafe VPN Client Security Policy
Authentication Phase 1 Proposal 1 Key Group field, as seen in “Connection Security
Policy Authentication (Phase 1)“ on page D-12.
–In the SA Life Time field, type 86400.
Click Apply. This will bring you back to the IKE Policies Menu.The FVL328 IKE Policy is
now displayed in the IKE Policies page.