User's Manual
Table Of Contents
- Reference Manual for the NETGEAR ProSafe VPN Client
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Installation
- Chapter 4 Configuring L2TP Connections
- Chapter 5 Using the Security Policy Editor
- What is the Security Policy Editor?
- Basic Steps to Configure a Security Policy
- How to Secure All Connections
- How to Configure Global Policy Settings
- How to Configure Other Connections
- How to Add and Configure a Connection
- How to Enter a Preshared Key
- How to Configure a Gateway
- Configure My Identity
- Configure Security Policy Connection Options
- Configure Authentication (Phase 1)
- Configure Key Exchange (Phase 2)
- Edit a Distinguished Name
- Configure and Manage Connections
- Manage Proposals
- Manage Redundant Gateways
- Manage the Security Policy
- Chapter 6 Using the Certificate Manager
- What is the Certificate Manager?
- Obtain Certificates
- With Online (SCEP) Enrollment
- CAs that Support SCEP
- Retrieve a CA Certificate Online
- Configure a CA Certificate
- Use an HTTP Proxy Server for Online Certificate Requests and CRL Updates
- Import a CA Certificate
- Select a CSP
- Request a Personal Certificate
- Define How Often to Check for and Retrieve New Personal Certificates
- Retrieve a Personal Certificate Manually
- Manage Certificate Requests
- With Manual (File-Based) Enrollment
- Obtain Certificates Through Internet Explorer
- With Online (SCEP) Enrollment
- Manage Certificates
- Manage Certificate Revocation Lists (CRLs)
- Manage the Trust Policy
- Chapter 7 Using Sessions
- Chapter 8 Distributing Customized Profiles
- Chapter 9 Troubleshooting
- Appendix A Networks, Routing, and Firewall Basics
- Appendix B Virtual Private Networking
- Appendix C NETGEAR ProSafe VPN Client to NETGEAR FVS318 or FVM318 VPN Routers
- Appendix D NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
- Glossary
- Index
Reference Manual for the NETGEAR ProSafe VPN Client
D-2 NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01
Figure D-1: Addressing and Subnet Used for Examples
Step-By-Step Configuration of FVL328 or FWAG114 Gateway
1. Log in to the FVL328 gateway as in the illustration.
Out of the box, the FVL328 is set for its default LAN address of http://192.168.0.1 with its
default user name of
admin and default password of password. Even though the remainder of
this document will refer to the FVL328, the login procedures and configuration menu screens
are the same for the FVL328 and the FWAG114.
2. Click IKE Policies under the VPN menu and click Add on the IKE Policies Menu.
Note: Product updates are available on the NETGEAR Web site at
www.netgear.com/support/main.asp. VPNC Interoperability guidelines can be found at
http://www.vpnc.org/InteropProfiles/Interop-01.html.
Gateway
0.0.0.0
66.120.188.153
192.168.0.0
WAN IP
WAN IP
LAN IP
Network Addresses
Client
PC with Netgear
ProSafe VPN client
FVL328