User manual

42 NS380 / NS380W User Guide
YML826 Rev1 - Pan/Tilt Internet Camera
Getting Started
This section describes the User Interface of IPView Pro, with detailed procedures for using the
application.
To launch IPView Pro, click Start > Programs > IPView Pro > IPView Pro. The main screen
will appear as below:
NOTE: IPView Pro requires the system’s resolution setting up to 1024x768.
Please configure the resolution to 1024x768 or higher; otherwise, it
may shows incomplete screen when launching the program.
Item Feature
NO. Item Description
Date/Time
Show current date/time.
Status Mode
Window
Show the camera’s status in this window.
Click the Change Status Mode button (
) on the right lower
corner of the window to change the display mode:
Camera list mode Camera information mode