User guide
78
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
UM-00003
www.netcommwireless.com
Call feature codes
Quick Reference Table
The NTC-30WV supports a number of call feature codes for supplementary services.
FEATURE
ACTIVATION
DEACTIVATION
STATUS
Caller ID
#31#
(to block an individual call)
*31#
(to unblock an individual call)
N/A
Call Waiting
*43#
#43#
*#43#
Call Forwarding Unconditional
*21*<Directory Number>#
#21#
*#21#
Call Forwarding No Answer
*61*<Directory Number>#
#61#
*#61#
Call Forwarding Busy
*67*<Directory Number>#
#67#
*#67#
Call Forwarding Unreachable
*62*<Directory Number>#
#62#
*#62#
Table 39 - Additional Product Information - Call Feature Codes Quick Reference
Caller ID
Caller ID transmits a caller’s number to the called party’s telephone equipment when the call is being set up but before the call is
answered. Where available, caller ID can also provide a name associated with the calling telephone number.
1.
To force Caller ID to be blocked for an outbound call, dial #31# followed by the number you wish to dial.
2.
To force Caller ID to be unblocked for an outbound call, dial *31# then follow the dialling number.
Call Waiting
Call waiting allows for indication and answering of an incoming telephone whilst an existing call is underway.
1.
To disable call waiting, dial #43#, and hang up after you hear 2 high pitch beeps.
2.
To enable call waiting, dial *43#, and hang up after you hear 2 low pitch beeps.
3.
To check the status of Call Waiting, dial *#43# or view the advanced status page of the management console.
(a)
Call waiting is disabled if you hear 2 high pitch beeps.
(b)
Call waiting is enabled if you hear 2 low pitch beeps.
Call forwarding (or call diverting), is a feature that allows an incoming call to be redirected to another number depending on the
circumstances at the time of receiving the call.
Note: The Call Waiting feature will automatically turn off if you enable Call forwarding. Call Waiting will need to be enabled
again after Call Forwarding is disabled.
Call Forwarding Unconditional
Call forwarding Unconditional will divert all incoming calls to a phone number that you desire.
1.
To enable Call Forwarding Unconditional, dial *21*<Directory Number>#
(Where directory number is the number you wish to forward calls to)
2.
Hang up after you hear 2 low pitch beeps.
3.
To disable Call Forwarding Unconditional, dial #21#
4.
Hang up after you hear 2 high pitch beeps.
5.
To check the status of Call Forwarding Unconditional, dial *#21# or view the advanced status page of the management
console.
(a)
Call Forwarding Unconditional is disabled if you hear 2 high pitch beeps.
(b)
Call Forwarding Unconditional is enabled if you hear 2 low pitch beeps.