User guide

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
63
Max. Diag. SMS Tx Limit
You can set the maximum number of acknowledgement and error messages sent when an SMS Diagnostics and/or Command is
executed. You can set the maximum limit on a per hour/day/week or month basis.
The default is to send a maximum of 100 messages per day.
You can check the current sent message count by looking next to the “Max. Diag. SMS Tx Limit” field. If the maximum number has
been exceeded, you can also reset sent the message counter by pressing the “Reset” button.
The Total transmitted message count resets after a reboot or at the beginning of the time frame specified.
Note: Times displayed are in UTC format.
For Example:
1. If the time frame is set to “HOUR” and the current time is “04:30”, then the counter will reset to zero at “05:00”.
2. If time frame is set to “DAY” and current date and time is “04:30” 17
th
of March, then the counter will reset to zero at “00:00”
18
th
of March.
3. If time period is set to “WEEK” and current date and time is “04:30” Saturday, then the counter will reset to zero at “00:00”
on the coming Monday.
4. If time period is set to “MONTH” and current date and time is “04:30” 17
th
of March, then the counter will reset to zero at
“00:00” 1
st
of April.
White List
A maximum number of 20 entries can be stored in the router.
If Authentication is enabled, any incoming Diagnostics/Command Execution SMS messages are processed only if the sender’s
number exists in White List and the message password matches with the password specified in the White List.
One blank entry is shown by default and you can add or delete an entry by pressing the “+” or ”–“ button. The White List numbers
and passwords can be cleared by pressing the “Delete” button.
To add an entry, simply enter the appropriate phone number and password and click “Save”.
Message Storage for Diagnostic Messages
Diagnostic messages (Diagnostic commands, acknowledgements and error notification messages) sent to remote destination are
stored in Inbox/Outbox.
Security
In order to provide security for SMS command execution, it is recommended that all SMS commands be subject to successful
authentication against the White List as well as setting a password for each phone number entered.
This prevents unauthorised or accidental execution of SMS commands.