User guide

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
43
Wireless Settings
Basic
The basic configuration page is used to define the basic wireless settings for the NTC-30WV such as the SSID and the type of
wireless security in use.
Figure 41 - Wireless Configuration - Basic Settings
OPTION
DEFINITION
Radio On/Off
WiFi is turned on by default. Changing this option to OFF will turn OFF the wireless functionality on the NTC-30WV and you will not
be able to connect wirelessly.
Country
Select the country where the router is operating.
Network Mode
Depending on the capability of your wireless device’s wireless network card select the network mode to use. There are 5 available
options. They are:
 11 b/g mixed mode
 11b only
 11g only
 11n only
 11 b/g/n mixed mode
If you are not sure which protocol to use set this option to 11 b/g/n mixed mode.
Frequency
The frequency or wireless channel that the router is broadcasting with. Recommended channels are 1, 6 or 11.
SSID
The SSID (Service Set Identifier) aka network name in use for the wireless network.
Network Authentication
The wireless security settings for the router. Please see below for further details.
WPA Pre-Shared Key
The wireless password in use by the router.
WPA Group Rekey interval
This is the time in seconds before a new key is generated.
WPA Encryption
The type of WPA encryption used with the wireless security settings.
MAC Address
The MAC Address of the Wireless Access Point.
WDS Mode
Set Wireless Distribution System (WDS) to enable or disable.
Table 25 - Wireless Configuration - Basic Configuration Items
Click ‘Apply’ to save the settings.