User guide

30
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
UM-00003
www.netcommwireless.com
Routing
Static
The Static Route page is used to add or delete static routes. Static routes can be used to facilitate communication between devices
on different networks.
Figure 30 - Static Route Settings
Some routes are added by default by the router on initialisation such as the Ethernet subnet route for routing to a device on the
Ethernet subnet. A PPP route is also added upon obtaining a WAN PPP connection.
Adding Static Routes
 Enter the required values in the fields (as shown above) for route being added.
 Click the “Add” button.
Note: You must increment the “Route no” by 1 for each route in the “Route no” field otherwise that route will be overwritten.
The Static Route will be displayed at the bottom of the Static Routes section.
Deleting Static Routes
Click the “Delete Entry” text (in blue).