User guide

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
29
DHCP
The DHCP page is used to adjust the DHCP settings used by the router. The DHCP settings are then passed onto any device
connecting via DHCP.
You can manually set the DHCP Start and End range, the DHCP Lease time, the default Domain name suffix, Primary and
Secondary DNS Server, the Primary and Secondary WINS Server, as well as the NTP, TFTP and Option 150/Option 160 (VoIP
options) settings.
Figure 28 - DHCP Settings
After entering the applicable details, click the “Save” button.
You can also assign a particular IP address to a specific device every time that device makes a DHCP request as follows:
Figure 29 - DHCP Settings - Fixed Mapping
1. Click the “Add” button.
2. Enter a name for the computer or device into the “Computer Name” textbox.
3. Enter the computer’s or device’s MAC address into the “MAC Address” textbox.
4. Enter the IP address you wish to assign to the device in the IP Address text boxes.
5. Select the Enable checkbox to enable the rule.
6. Click the “Save” button to save the new settings.