User guide

28
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
UM-00003
www.netcommwireless.com
LAN
IP Setup
The IP Setup page is used to configure the LAN Settings of the router and to enable or disable DNS Masquerade.
Figure 27 - IP Setup Settings
The default IP of the Ethernet port is 192.168.1.1 with subnet mask 255.255.255.0.
To change this, enter the new IP Address and/or Subnet mask and click “Save”.
Note: If the IP address has changed you will have to re-enter the new IP address configured in your browser to access the
configuration pages.
DNS Masquerading
DNS masquerading allows the router to forward DNS requests to dynamically assigned DNS servers. Clients on the router’s LAN
can then use the router as a DNS server without needing to know of the dynamically assigned DNS servers assigned by the cellular
network.
There should be no need to disable this feature in most cases, however, if you need to do so simply select “Disable” and click the
Save button.