User guide

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
25
PPPoE
The PPPoE page is used to configure a transparent PPPoE connection. This can be used to provide a bridged connection.
To enable PPPoE mode, firstly ensure the “Auto Connect” is disabled in all the profiles on the “Connection” configuration page by
clicking on the “Internet Settings” menu followed by “Mobile Broadband “and then the “Connection” menu item on the right. Select
each connection profile and disable the Auto Connection option then save the updated settings.
Figure 21 - PPPoE Settings
1. Select “Enable” to enable PPPoE.
2. Specify the APN supplied by your 3G provider.
(Optional)
3. Specify a “Service Name”.
This is particularly useful if you have more than one PPPoE router or modem on a single Ethernet network.
Click “Save” to save your settings and enable PPPoE.