User guide

22
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
UM-00003
www.netcommwireless.com
ITEM
DEFINITION
Phone Module
The phone module name, hardware and firmware version
Module Boot version
The installed bootloader version of the phone module.
Module PRID
The Protocol ID of the phone module.
System Uptime
The time in minutes and seconds that the gateway has been up.
Provider
The current connection’s 3G provider.
Country Code
Each country has a unique code that helps to identify the 3G network.
Network code
Each 3G provider has a unique network code for network identification purposes.
Coverage
The coverage type of 3G service the current connection is using.
Connection Status
The current status of the gateway’s connection.
IMEI
The International Mobile Equipment Identity number unique to each cellular network
device.
Frequency
The frequency of the current connection.
Signal Strength (dBm)
The signal strength of the 3G connection measured in decibels.
Signal Quality (Echo/Location)
A measurement of the portion of the received signal that is usable. This is basically
the signal strength minus the signal noise level.
Received Signal Code Power
(RSCP)
The power level of the signal on the current connection’s particular channel.
SIM ICCID
The Integrated Circuit Card Identifier of the SIM card used. A unique number up to
19 digits in length.
Primary Scrambling Code (PSC)
The Primary Scrambling Code for the current signal.
Location Area Code (LAC)
The ID of the cell tower grouping the current signal is broadcasting from.
Routing Area Code (RAC)
The Routing Area Code is a subset of the Location Code and helps to identify the
group of or individual cell towers the current connection is broadcasting from.
IMSI
The International Mobile Subscriber Identity is a unique identification for the current
3G connection.
Cell ID
A unique code that identifies the base station from within the Location Area of the
current 3g signal.
Channel Number
The channel number of the current 3G connection.
Table 20 - Advanced Status Page