User guide

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
19
Status
The status page provides system related information and is displayed when you login to the NTC-30WV management console. By
default, the status page will show System Information, Ethernet Port Status, WWAN Status, IPsec Status and the 3G service
connection details.
Figure 13 - The Status Page
ITEM
DEFINITION
System Uptime
The current uptime of the router.
Router Version
The firmware version running on the router.
Phone Module
The type of phone module, the firmware version of the module and the current module temperature.
MAC Address
The MAC Address of the router which serves as a unique identifier of network devices.
Ethernet Port Status
The current speed and status of the Ethernet port.
WWAN
The current connection profile, Interface, status, APN, and local address of the WWAN connection.
IPsec
The current connection profile, Interface, status, Local LAN address, Remote Gateway address, Remote LAN address
and the status of the IPsec connection. If none are configured, this should be empty.
Provider
The current 3G service provider detected.
Coverage
The type of 3G connection available for use.
IMEI
The IMEI of the router.
Frequency
The frequency band currently in use.
Signal Strength
The strength of the 3G signal detected
SIM Status
The status of the SIM currently inserted into the router.
Table 14 - Status page items
To view the LAN, PPPoE or PPTP status individually, click on the links below the green menu bar. To view them all, click on the All
Status link.