User guide

12
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
UM-00003
www.netcommwireless.com
NTC-30WV Default Settings
The following tables list the default settings for the NTC-30WV.
LAN (MANAGEMENT)
Static IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.1
Table 10 - LAN Management Default Settings
WIRELESS (WIFI)
SSID:
NetComm XXXX
(where XXXX is 4 random numbers)
Security:
WPA2-PSK
Security Key:
XXXXXXXXXX
(where XXXXXXXXXX are 10 random
characters)
Table 11 – WiFi Default Settings
For security purposes, it is recommended to change the Default SSID and Wireless Security Key.
ADMIN MANAGER ACCOUNT
ROOT MANAGER ACCOUNT
Username:
admin
Username:
root
Password:
admin
Password:
admin
Table 12 - Web Interface Default Settings
Note: The admin manager account allows you to manage most of the settings of the router except functions such as
Firmware Upgrade, Device Configuration Backup, Mobile Broadband Connection settings, and Reset to
Factory Default Settings, which are privileged only to the root manager account. First time users should use the
root manager account to configure Mobile Broadband settings.